KDC User Manual BLUETOOTH
88
Display Prefix
⚫ Suffix - Enables the user to add a suffix to scanned data, which may then be wedged to
the host. The suffix must be defined in the KTSync. The maximum length for a suffix is
11 characters.
• This Suffix option is different from the Suffix option in KTSync, which appends the
suffix to data during synchronization.
• The user may also define the suffix by scanning characters defined in Appendix
C&D(E&F for KDC500). as shown below in the special barcodes.
20/100/200/250/270L/270D/350L/410/411/415/470L/470D/500L
Suffix Enter Start
Prefix/Suffix Enter Finish
KDC30/270C/280C/300/350C/420/421/425/450/470C/500C
Suffix Enter Start
Prefix/Suffix Enter Finish
To Next Page
Loading...
