15 îîAppendix
Group 90: HW initialisation
90-0 Missing hardware
component (SRAM)
Please contact the Technical Support team.
90-1 Missing hardware
component (FLASH)
90-2 Error during booting of
FPGA
90-3 Error during start of SD-
ADUs
90-4 Synchronisation error
SD-ADU after start
90-5 SD-ADU not in
synchronism
90-6 IRQ0 (current
controller): trigger error
90-7 CAN controller not
available
90-8 Device parameters
checksum error
90-9 DEBUG-Firmware
loaded
Group 91: SW initialisation
91-0 Internal initialisation
error
Please contact the Technical Support team.
91-1 Memory error (copy)
91-2 Reading of the
controller/power output
stage type failed
91-3 Internal software
initialization error
Group 92: Bootloader/Firmware update
92-0 Error during firmware
download
The firmware file is corrupted, e.g. due to a mail
client or virus scanner.
Request the firmware file again or transfer it as a
ZIP file.
If the error is still present, contact the Technical
Support team.
92-1 Error during bootloader
update
92-2 Erase error (int. flash)
92-3 Programming error (int.
flash)
92-4 Erase error (int. flash)
92-5 Programming error (ext.
flash)
92-6 Firmware file: format
error
Product manual BL 4000-C Page 298 of 298
To Previous Page
Loading...
