Automation 83
PRO2 Live Audio System
Owner’s Manual
2 At the Enter new show name: message
window, type your chosen name for the new
show.
3 Click OK. You can now create and manage
the scenes for your new show.
>> To save a show or create a new one from the current settings
Do one of the following:
• To update the current show with the latest settings, click SAVE.
• To create a new show using the current show
settings, click SAVE AS. Then, in the Save
File window (shown right), type in the name of
the new show in the Save this file as: name
field. Click OK to save the new show and close
the window.
• To overwrite an existing show, click SAVE AS.
Then, in the Save File window (shown right),
click the show you want to overwrite to select
it, click the Overwrite existing? box to select
it this option and then click OK.
>> To load a show
1 Click LOAD.
2 In the Load File window, click the show file
you want to load (shown right). For
example, “Replica.show”. The file name will
appear in the Load this file: name field.
The Load File window will contain a list of
all the shows currently loaded. If the one
you want is not there, import it (see “To load
(import) a show file from a USB memory
stick” on page 92).
3 Click OK. The file will start loading and the
window will close.
When the file has finished loading, its name will appear in the show file name
field (to the right of the SAVE AS button).
To Next Page
Loading...
Need help?
General
