Midas PRO2

Delay effect 131
PRO2 Live Audio System
Owner’s Manual
13 Model select
button
Selects digital or analogue delay model. Current
selection is shown by the illumination of one of the
LEDs above (Dig. or Anlg.).
14 ON switch Switches the delay effect on/off.
15 Gain control knob Adjusts the amount of gain between -20 and +20,
with 0 at top dead centre.
16 Mix control knob Adjusts the mix between dry (0%) wet (100%).
17 HF Depth control
knob
Adjusts depth of HF damping modulation. Range is 0
to 100, with 50 at top dead centre.
18 Right channel
delay time control
knob
For entering the desired delay time (in ms).
19 Tempo control
knob
Adjusts the tempo in tempo mode. Range is from 60
to 240 beats per minute (bpm).
20 Tap button For manually tapping the tempo once the unit is in
BPM Sync (TAP TEMPO) mode.
Item Control Function