204 Chapter 25: File Management
PRO2 Live Audio System
Owner’s Manual
The following table describes all of the buttons on the Files screen.
6 Removable Storage panel, shows the files currently stored on the storage
media (typically, a USB memory key) that is plugged into the active USB
socket on the control centre (see “Control surface” on page 235). This
panel only appears when the storage media is connected to the control
centre, otherwise it is blank. Immediately after plugging in the storage
media, you will probably see the message “Analysing...”, while its contents
are being read.
7 Control Surface panel, shows the files stored on the control centre’s SSD.
Button Function
SAVE Saves the currently loaded show in its current state. Turns red
when there are changes to be saved.
LOAD Loads the selected show file.
COPY Copies selected file to its local section, appending “_copy1” to its
name. Subsequent copies of the same will file will increment the
‘copy’ number by one, that is, “_copy2”, “_copy3” etc.
RENAME Lets you to rename the selected file in its local section.
DELETE Deletes the selected file in its local section.
EXPORT Copies file selected in Control Surface section to the
Removable Storage section, effectively copying it onto the
removable device. This provides a useful backup facility.
IMPORT Copies the file selected in the Removable Storage section to the
Control Surface section (PRO2).
Item Description
To Next Page
Loading...
Need help?
General
