Midas PRO2 User Manual

Processing 13
PRO2 Live Audio System
Owner’s Manual
• Routing to mono master bus.
•Panpot (SIS™).
• Direct output.
Each of the 16 auxiliary inputs has:
• Input gain.
• Source from internal FX or external pool input.
•Fader.
•Panpot (SIS™).
• Routing via level controls to the eight matrix buses.
• Routing via pan control to the left, right and mono master buses.
Mix channel processing
Each of the 16 auxiliary mix buses has:
• Subgroup, auxiliary or mix minus modes.
• Dual mono or stereo pair modes.
• Six-band PEQ.
• Optional 31-band GEQ (replaces PEQ).
• Frequency-conscious compressor with soft clip limiter and choice of five compression
styles.
• Insert point.
• Routing via level controls to the 6 matrix buses.
• Routing via pan control to the left, right and mono master buses.
• Direct input.
Each of the eight matrix buses has:
• Six-band PEQ.
• Optional 31-band GEQ (replaces PEQ).
• Five-mode frequency-conscious compressor with soft clip limiter and external side
chain.
• Insert point.
• Direct input.
Output channel processing
Each of the eight matrix buses has:
• Six-band PEQ.
• Optional 31-band GEQ (replaces PEQ).
• Five-mode frequency-conscious compressor with soft clip limiter and external side
chain.
• Insert point.
• Direct input.
The two master output buses each has:
• Six-band PEQ.
• Optional 31-band GEQ (replaces PEQ).
• Five-mode frequency-conscious compressor with soft clip limiter and external side
chain.
• Insert point.
• Direct input.

Midas PRO2 Specifications

General

Sample Rate	96 kHz
Talkback	Yes
MIDI I/O	Yes
Computer Connectivity	USB, Ethernet
Processing	40-bit floating point
Recallable Preamps	Yes
Channels	64
Matrix	8 matrix buses
Display	15" TFT display
Connectivity	Ethernet, MIDI
Type	Digital
EQ Bands	4-band parametric EQ
Inputs - Mic Preamps	8 XLR
Outputs - Main	8 XLR
Effects	Reverb, Delay, Modulation, etc.
Dynamic Processing	Gate, Compressor, Limiter
Control Surface	Motorized faders, touchscreen
Power Supply	Internal