Midas PRO2 User Manual

Aux Sends (aux channels) 531
PRO2 Live Audio System
Owner’s Manual
EQs
The following diagram shows the EQ parameters copied through scenes.
* Not shown in diagram.
Note: Although bands 5 and 6 are not shown above, the items in the table also apply.
Both bands have items 2, 3 and 4, and band 6 also has item 7.
Aux Sends (1 to 16)
Not applicable.
Item Control Parameter
1 EQ switch EQ on/off
2 gain control knob EQ gain level
3 width control knob EQ width
4 freq control knob EQ frequency
5 SHAPE switch Band 1 shelving mode: parametric, warm, high
pass 6dB or high pass 12dB. (This band is not
available if band 2 is selected as high pass 24dB.)
6 SHAPE switch Band 2 shelving mode: parametric or high pass
24dB
7* SHAPE switch Band 6 shelving mode: parametric, soft, low pass
6dB or low pass 12dB
8 C/O switch
Order of processing: Dyn.
JIns.JEQ or
EQ
JIns.JDyn.
4
2
3
4
2
3
6
2
3
5
2
3
4
1
4
8
8
1
4
5/6/7
2
3

Midas PRO2 Specifications

General

Sample Rate	96 kHz
Talkback	Yes
MIDI I/O	Yes
Computer Connectivity	USB, Ethernet
Processing	40-bit floating point
Recallable Preamps	Yes
Channels	64
Matrix	8 matrix buses
Display	15" TFT display
Connectivity	Ethernet, MIDI
Type	Digital
EQ Bands	4-band parametric EQ
Inputs - Mic Preamps	8 XLR
Outputs - Main	8 XLR
Effects	Reverb, Delay, Modulation, etc.
Dynamic Processing	Gate, Compressor, Limiter
Control Surface	Motorized faders, touchscreen
Power Supply	Internal