Mindray WATO EX-65 - Set bis Related Waveforms; To Set bis EEG Waveform; To Set bis Trend Waveform

10-8
10.11 Set BIS Related Waveforms
To set BIS EEG waveform:
1. Select the waveform area, open the corresponding menu.
2. Select [BIS EEG] for [Waveform].
3. Select [Sweep] and set waveform sweep speed to an appropriate value. The greater the
value is set to, the faster the waveform sweeps, the wider the waveform is.
4. Select [Scale] and set waveform scale to an appropriate value.
5. Select [Filter] and toggle between [ON] and [OFF].
6. Select
to exit the current menu.
To set BIS Trend waveform:
1. Select the waveform area, open the corresponding menu.
2. Select [BIS Trend] for [Waveform].
3. Select [Trend Length] and toggle between [6 min], [12 min], [30 min] and [60 min].
4. Select
to exit the current menu.
For details about displaying the BIS related waveforms, refer to 5.3.9BIS Monitoring.