Mindray WATO EX-65 - Factory Defaults; CO2 Module; Mainstream CO2 Module; Microstream CO2 Module

F-1
F Factory Defaults
This chapter lists the most important factory default settings which are not user-adjustable.
When necessary, you can restore the factory default settings.
F.1 CO2 Module
CO
2
module alarm limits Factory default settings
Alarm Level Med
EtCO2 High Limit (mmHg) 50
EtCO2 Low Limit (mmHg) 15
FiCO2 High Limit (mmHg) 4
F.1.1 Mainstream CO2 Module
CO
2
Setup Factory default settings
Paw Unit mmHg
Working Mode Measure
Max Hold 10 s
Balance Gas Room Air
O2 Comp OFF
AG Comp 0
F.1.2 Microstream CO2 Module
CO2 Setup Factory default settings
Paw Unit mmHg
Working Mode Measure
Max Hold 20 s
Auto Standby (min) 0
Humidity Comp Wet