13-36
13.10.2 Assemble the AGSS
1. Mount the AGSS bracket onto the lower left decorative plate of the anesthesia machine.
2. Mount the AGSS system already equipped with hook onto the AGSS bracket. Connect
the 30 mm male conical connector of the transfer tube to the gas inlet of the receiving
system. Connect the AGSS outlet to the hospital’s waste gas disposal system using the
AGSS active scavenging tube.
AGSS active
scavenging tube
which is connected
with the hospital’s
waste gas disposal
system
Install M4 socket
head screws and
spring washers
Install fixed pins
Transfer tube
To Next Page
Loading...
