5-14
5.3.9 BIS Monitoring
5.3.9.1 Display BIS Parameters
If your anesthesia machine is configured with BIS module, on the normal screen, BIS related
parameters are displayed as shown below.
[BIS]: Bispectral index
[SQI]: Signal quality index
[EMG]: Electromyograph
If your anesthesia machine is configured with BIS module, on the special screen, BIS related
parameters are displayed as shown below.
Non-Extend sensor Extend sensor
[BIS]: Bispectral index
[SQI]: Signal quality index
[EMG]: Electromyograph
[SR]: Suppression ratio
[SEF]: Spectral edge frequency
[TP]: Total power
[BC] : Burst count
To Next Page
Loading...
