5-1
5 User Interface and Parameter Monitoring
5.1 Screen Layout
Depending on module and functional configurations, user screens differ in parameter&graph
area and parameter setup shortcut keys area.
User screens fall into four categories:
Standby screen
Normal screen
Big numerics screen
Measured values screen
The standby screen is switched over through the Standby key
on the panel. You can
easily switch between the other three types of screen by using the [Screens] shortcut key.
NOTE
z This manual describes all functions and modules. Some of the operations may be
inapplicable to your equipment.
z All illustrations in this manual serve as examples only. They may not necessarily
reflect the setup or data displayed on your anesthesia machine.
To Next Page
Loading...
