Mindray WATO EX-65 - Display bis EEG Waveform; Set bis EEG Waveform

5-15
5.3.9.2 Display BIS EEG Waveform
If your anesthesia machine is configured with BIS module, BIS EEG and BIS Trend
waveforms are displayed as shown below.
BIS EEG waveform:
BIS Trend waveform:
5.3.9.3 Set BIS EEG Waveform
1. Select the waveform area to access the waveform setup menu.
2. Select [Waveform] and select [BIS EEG].
3. Select [Sweep] and set waveform sweep speed to an appropriate value. The greater the
value is, the faster the waveform sweeps, the wider the waveform is.
4. Select [Scale] and set waveform scale to an appropriate value.
5. Select [Filters] and toggle between [ON] and [OFF].
6. Select
to exit the current menu.
5.3.9.4 Other Settings
For details, refer to 10 BIS Monitoring.