Mindray WATO EX-65 - Page 253

D-3
EtCO2 Too High ●
EtCO2 Too Low ●
FiCO2 Too High ●
FiCO2 Too Low ●
EtN2O Too High ●
EtN2O Too Low ●
FiN2O Too High ●
FiN2O Too Low ●
EtHal Too High ●
EtHal Too Low ●
FiHal Too High ●
FiHal Too Low ●
EtEnf Too High ●
EtEnf Too Low ●
FiEnf Too High ●
FiEnf Too Low ●
EtIso Too High ●
EtIso Too Low ●
FiIso Too High ●
FiIso Too Low ●
EtSev Too High ●
EtSev Too Low ●
FiSev Too High ●
FiSev Too Low ●
EtDes Too High ●
EtDes Too Low ●
FiDes Too High ●
AG
module
FiDes Too Low ●
EtCO2 Too High ●
EtCO2 Too Low ●
CO
2
module
FiCO2 Too High ●
BIS Too High ●
BIS
module
BIS Too Low ●
The measured value has risen above the high alarm limit or
fallen below the low alarm limit. Check the patient’s
physiological condition. Make sure that patient type and
alarm limit settings are correct.