MC40IntegratorGuide
ProcedureSteps
1Touch.
2Touch.
3TouchDisableMultiUser.
Stepresult:TheMulti-userfeatureisdisabledimmediately.
6.5.3EnablingRemoteAuthentication
WhenRemoteAuthenticationisenable,thedevicesearchesfortheremoteserverduringthelogin
procedure.Iftheremoteserverisnotavailableortheaddressisincorrect,theuserwouldnotbe
abletologinandanEnterpriseresetisrequiredtoaccessthedevice.
ProcedureSteps
1Touch.
2Touch.
3TouchLoadServerInfo.TheapplicationreadsthedatafromtheserverleandcongurestheMulti-user
Loginfeature.
4Touch.
5TouchEnableRemoteAuthentication.
Stepresult:ThedeviceaccessestheremoteserverandthenLoginscreenappears.
6.5.4DisablingRemoteAuthentication
WhenRemoteAuthenticationisenable,thedevicesearchesfortheremoteserverduringthelogin
procedure.Iftheremoteserverisnotavailableortheaddressisincorrect,theuserwouldnotbe
abletologinandanEnterpriseresetisrequiredtoaccessthedevice.
6-12
MN000112A01-September2013