Muratec F-525 User Manual

3-95
Unique Switch 060 — Remote reception
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 1 Factory use only
2 0 Use numeric keypad on the
fax using second phone
0: No
1: Yes
Determines if using the numeric keypad on the
control panel of the fax using the second phone.
1 1 Manual transmit/receive
using Start key after off-hook
of second phone
0: No
1: Yes
Determines if transmitting or receiving manually
using Start key after off-hook of the second phone.
Note: To enable this function Unique Switch 060: 2
must also set to “1”
0 0 Silent detection
0: No
1: Yes
Enables or disables silent detection during Ans/Fax
Ready mode.
Unique Switch 061 ~ 063 — Factory use only
Unique Switch 064 — Remote reception
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Load 24V to TEL 2 line
0: No
1: Yes
When set to “1”, 24 V will be loaded to TEL 2 in
communication.
Note: Set to “1” in 064 bit 0 when make this feature
available.
2 0 Factory use only
1 0 Factory use only
0 0 Set the relay of TEL 2 in
Silent receiving
0: On
1: Off
When set to “1”, TEL 2 does not ring in the silent
receiving.
Unique Switch 065 ~ 066 — Factory use only

Muratec F-525 Specifications

General

Brand	Muratec
Model	F-525
Category	All in One Printer
Language	English