NEC SL1100 - Chapter 7 Application Level Configuration; SECTION 1 INTRODUCTION; SECTION 2 PREFERENCES MENU

Program 11 : System Numbering
11-15 : Service Code Setup, Administrative (for Special
Access)
Level:
IN
Description
Use Program 11-15 : Service Code Setup, Administrative (for Special Access) to customize the
special access Service Codes which are used by the administrator in the Hotel/Motel feature. You can
customize additional Service Codes in Programs 11-10 ~ 11-14 and 11-16.
The following chart shows:
• The number of each code (01 ~ 14).
• The function of the Service Code.
• What type of telephones can use the Service Code.
• The default entry.
• Programs that may be affected when changing the code.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Remote Mainte-
nance
0~9,
*
, # Maximum of
8 digit
730
02 ACD Access in
Dialin Conver-
sion Table (V1.5
Added)
0~9,
*
, # Maximum of
8 digit
760 22-04
22-11
05 System Program-
ming Mode, Log-
On
0~9,
*
, # Maximum of
8 digit
Terminal: MLT #
*
#
*
11-01
09 Transfer to In-
coming Ring
Group
0~9,
*
, # Maximum of
8 digit
No Setting
12 Extension Data
Swap
0~9,
*
, # Maximum of
8 digit
Terminal: MLT No Setting 92-04
13 Remote Access
from DISA
0~9,
*
, # Maximum of
8 digit
No Setting 22-02
14 Modem Access 0~9,
*
, # Maximum of
8 digit
740
MLT = Multiline Terminal
SLT = Single Line Telephone
Conditions
None
ISSUE 6.0
SL1100
Programming Manual 2-85
Program
11