Program 31 : Paging Setup
31-02 : Internal Paging Group Assignment
Level:
IN
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to Internal Paging
Groups (i.e., Page Zones). The setting in this program also determines if the Internal Page Group can
receive Internal All Call Paging. The system can have up to 32 paging groups. An extension can be in
only one Internal Paging Group.
Input Data
Extension Number Maximum eight digits
Item
No.
Item Input Data Description Default
01 Internal Paging Group
Number
0 ~ 32
(0 = No setting)
Assign extensions to Internal Paging
Groups (i.e., Page Zones). The system al-
lows up to 32 Internal Paging Groups. An
extension can be in only one Internal Pag-
ing Group.
Port 1 ~ 16 = 1
(Group 1),
Port 17 ~ = 0
02 Internal All Call Pag-
ing Receiving
0 = Off
1 = On
Allow or prevent All Call Internal Paging for
each extension. If allowed, extension can
place and receive All Call Internal Paging
announcements. If prevented, extensions
can only make (not receive) All Call Inter-
nal Paging announcements. If combined,
Paging zones should be restricted as well,
change the internal page zone group in
Program 31-07-01 to 0.
0
Conditions
None
Feature Cross Reference
• Paging, Internal
SL1100
ISSUE 6.0
2-324 Program 31 : Paging Setup
Program
31
To Next Page
Loading...
