NEC SL1100 - Preselected Data Setup

Program 90 : Maintenance Program
90-33 : Preselected Data Setup
Level:
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use 90-33 : Preselected Data Setup to setup the system to preselected setting.
Input Data
Item
No.
Item Input Data Default
01 China Dial 1 + press Hold (Press Hold only to cancel.) Refer below
02 Chile Dial 1 + press Hold (Press Hold only to cancel.) Refer below
04 Taiwan Dial 1 + press Hold (Press Hold only to cancel.) Refer below
05 Korea Dial 1 + press Hold (Press Hold only to cancel.) Refer below
06 Hong Kong Dial 1 + press Hold (Press Hold only to cancel.) Refer below
07 Brazil Dial 1 + press Hold (Press Hold only to cancel.) Refer below
08 Malaysia Dial 1 + press Hold (Press Hold only to cancel.) Refer below
09 Thailand Dial 1 + press Hold (Press Hold only to cancel.) Refer below
10 India Dial 1 + press Hold (Press Hold only to cancel.) Refer below
Default
China
Program No. Name Default
10-02-01 Country Code 86
(For China)
14-02-09 Busy Tone Detection 1
(All trunks : On)
14-02-18 Busy Tone Detection on talking 1
(All trunks : On)
15-03-15 Disconnect without dial after hooking hold 1
(All stations = Disconnect)
20-01-09 Camp-on cancel time 30
20-02-12 Mode setting for incoming call from extension 1
(Signaling call)
20-17-01 Operator’s Extension number 101 (Operator 1 = 101)
20-31-02 Callback / Trunk Queuing Cancel Time 30
20-31-07 Ring No Answer Alarm Time 30
20-31-08 DIL/Incoming Ring Group No Answer Time 30
20-31-19 DISA Conversation Warning Tone Timer 180
ISSUE 6.0 SL1100
Programming Manual 2-565
Program
90