NEC SL1100 - Automatic Trunk-To-Trunk Transfer Target Setup

Program 24 : Hold/Transfer Setup
24-04 : Automatic Trunk-to-Trunk Transfer Target Setup
Level:
IN
Description
Use Program 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup to assign the Speed Dialing
number bin which should be used as the destination of the Automatic Trunk-to-Trunk Transfer.
Input Data
Trunk Port Number 001 ~ 084
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Default Description
Related
Program
01 Speed Dial Area Number 0 ~ 999 999 The destination telephone number of the
Trunk-to-Trunk Transfer uses the number
registered into the Speed Dial. Use this
program to setup the Speed Dial Bin
Number.
11-10-08
13-04
24-05
Conditions
None
Feature Cross Reference
• Call Forwarding, Off-Premise
SL1100 ISSUE 6.0
2-286 Program 24 : Hold/Transfer Setup
Program
24