Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Level:
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
multiline telephones.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Trunk Loop Key Op-
eration Mode
0 = Keep Lamp
1 = Extinction
1
Mode 0 = Keep Lamp 1 = LED Off
Incoming : 300 IPM Red blink
Talking : Green Lighting
(on Talking TEL)
LED Off
Holding : 60 IPM Green
blink (on holding
TEL)
LED Off
02 Trunk Group Access
Key Operating Mode
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
Use this option
to set the oper-
ating mode of
the extension
trunk group
keys. The keys
are for incom-
ing access,
outgoing ac-
cess, or both.
0
04 Retrieve the Line Af-
ter Transfer
0 = Not Holding (No Keep)
1 = Holding (Keep)
Enable (1) or
disable (0) an
extension abili-
ty to answer a
call after it has
been transfer-
red, but before
it is answered.
1
05 Headset Busy Mode 0 = No (Disable)
1 = Yes (Enable)
Set the condi-
tions under
which a head-
set extension
is busy to in-
coming callers.
0 20-09-07
06 Pre-selection Time 0 ~ 64800 seconds When a multi-
line terminal
user preselects
a line key, the
system re-
members the
pre-selection
for this time.
5
SL1100 ISSUE 6.0
2-170 Program 20 : System Option Setup
Program
20
To Next Page
Loading...
