NEC SL1100 - Door Box Basic Setup

Program 32 : Door Box and Sensor Setup
32-03 : Door Box Basic Setup
Level:
IN
Description
Use Program 32-03 : Door Box Basic Setup to select the chime pattern and gain level for each Door
Box. There are six distinctive chime patterns. The chime tones are defined in 80-01 : Service Tone
Setup. on page 2-449
The Door Box feature is called Door Phone when programming via WebPro and using a multiline terminal.
Input Data
Door Box Number 1 ~ 6
Item
No.
Item Input Data Description Default
01 Chime Pattern 0 = None
1 = Door Box Ring 1
2 = Door Box Ring 2
3 = Door Box Ring 3
4 = Door Box Ring 4
5 = Door Box Ring 5
6 = Door Box Ring 6
Per door box specify the chime pattern for
ringing.
Door Box 1 = 1
Door Box 2 = 2
Door Box 3 = 3
Door Box 4 = 4
Door Box 5 = 5
Door Box 6 = 6
02 CODEC Transmit
Gain Setup
1 ~ 63 (- 15.5 dB ~
+ 15.5 dB)
This program controls the gain levels from
the system to the door box.
32
03 CODEC Receive Gain
Setup
1 ~ 63 (- 15.5 dB ~
+ 15.5 dB)
This program controls the gain levels from
the door box to the system.
32
Conditions
None
Feature Cross Reference
• Door Box
ISSUE 6.0
SL1100
Programming Manual 2-335
Program
32