NEC SL1100 - Section 8 WHAT the SOFTKEY DISPLAY PROMPTS MEAN; Section 9 SYSTEM NUMBER PLAN;CAPACITIES; Table 1-3 Softkey Display Prompts; Table 1-4 System Number Plan;Capacities

_
Program Mode
Hard Mtnance
SECTION 8 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN
When using a display telephone in programming mode, various Softkey options are displayed. These
keys will allow you to easily select, scan, or move through the programs.
Table 1-3 Softkey Display Prompts
Softkey Display Prompts
If you press this Soft-
key ...
The system will ...
back Go back one step in the program display.
You can press Cursor Key (UP) or Cursor Key (Down) to scroll forward or backward through a
list of programs.
Scroll down through the available programs.
Scroll up through the available programs.
select Select the currently displayed program.
Move the cursor to the left.
Move the cursor to the right.
- 1 Move back through the available program options.
+ 1 Move forward through the available program options.
SECTION 9 SYSTEM NUMBER PLAN/CAPACITIES
The following table provides the capacities for the SL1100 system.
Table 1-4 System Number Plan/Capacities
System Number Plan/Capacities Note
System Type Number Plan/Capacities Related Pro-
gram
System
Analog Caller ID Detector (detec-
ted by DSP)
96 channels
Classes of Service 15 20–06
Day/Night Mode Numbers 8 12–07
Day/Night Service Patterns 4 12–07
Dial Tone Detector
DTMF Receiver
96
Toll Restriction Classes 15
Verifiable Account Code Table 800 35–06
Trunk
Trunk Port Number 84
ISSUE 6.0 SL1100
Programming Manual 1-5