Program 44 : ARS/F-Route Setup
44-02 : Dial Analysis Table for ARS/F-Route Access
Level:
IN
Description
Use Program 44-02 : Dial Analysis Table for ARS/F-Route Access to set the Pre-Transaction Table
for selecting ARS/F-Route.
Input Data
Dial Analysis Table Number 001 ~ 120
Item
No.
Item Input Data Description Default
01 Dial Up to eight digits
(Use line key 1 for a
Don’t Care digit, @)
Set the number of digits to be analyzed by
the system for ARS routing.
No Setting
02 Service Type 0 = No setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension Ana-
lyze Table (Option)
• Service Type 1 (Extension Number)
The number goes to an extension after
deleting the front digit(s).
Additional Data
Assign the digit(s) to be deleted on top
of the number for extension number us-
age. At least one digit must be deleted.
• Service Type 2 (ARS/F-Route)
The number is controlled by ARS/F-
Route table.
Additional Data:
If the ARS/F-Route Time Schedule is not
used, assign the ARS/F-Route table
number for Program 44-05.
If the ARS/F-Route Time Schedule is
used, assign the ARS/F-Route selection
number for Program 44-04.
• Service Type 3 (Dial Extension Analyze
Table)
The total length of the number exceeds
more than 8 digits.
Additional Data:
Assign the Dial Extension Analysis Table
number to be used in Program 44-03.
0
03 Additional Data 1 = Delete Digit = 0 ~
255 (255 = Delete All
Digits)
2 = 0 ~ 100 (0 = No Set-
ting)
3 = Dial Extension Ana-
lyze Table Number = 0 ~
4 (0 = No Setting)
For the Service Type selected in 44-02-02,
enter the additional data required.
• 1 : Delete Digit = 0 ~ 255
(255 = Delete All Digits)
• 2 : [Program 44-01 : 0]
ARS/F-Route Table Number = 0 ~ 100
(0 = No Setting)
Refer to Program 44-05.
[Program 44-01 : 1]
ARS/F-Route Select Table Number = 0
~ 100 (0 = No Setting)
Refer to Program 44-04.
• 3 : Dial Extension Analyze Table Num-
ber = 0 ~ 4 (0 = No Setting)
Refer to Program 44-03.
0
SL1100 ISSUE 6.0
2-390 Program 44 : ARS/F-Route Setup
Program
44
To Next Page
Loading...
