NEC SL1100 - Program 80: Basic Hardware Setup for System; Service Tone Setup; Table 2-13 Basic Tones

Program 80 : Basic Hardware Setup for System
80-01 : Service Tone Setup
Level:
IN
Description
Use Program 80-01 : Service Tone Setup to define up to 64 Service Tones. Each service tone is
defined by the combination of 32 Basic Tones.
Input Data
Service Tone Number 01 ~ 64
Item
No.
Item Input Data Default
01 Repeat Count 0 ~ 255 (0 = Endless) Refer below
Unit Number 1 ~ 8
Item
No.
Item Input Data Default
02 Basic Tone Number 0 ~ 33
(0 = No Tone)
(33 = Default Time Slot)
Refer below
03 Duration Count 0 ~ 255 (0, 100 ~ 25500 ms) Refer below
04 Gain Level (dB) 0 ~ 63 (- 15.5 ~ + 15.5) Refer below
Table 2-13 Basic Tones
Basic Tone No. Frequency (Hz) Level (dB)
01 400 - 13
02 520 - 13
03 580 - 13
04 660 - 13
05 700 - 13
06 800 - 13
07 880 - 13
08 1050 - 13
09 350 / 440 - 16 / - 16
10 440 / 480 - 16 / - 16
11 480 / 620 - 21 / - 21
12 440 -16
13 -- Reserve -- -
14 520 / 650 -19 / -13
ISSUE 6.0 SL1100
Programming Manual 2-449
Program
80