Program 47 : InMail
47-01 : InMail System Options
Level:
IN
Description
Use Program 47-01 : InMail System Options to set up the InMail system-wide options.
Input Data
Item
No.
Item Input Data Description Default
02 InMail Master Name Up to 12 characters (MasterName)
The CPU must be reset for a change to
this program to take effect.
Use this option to modify the name for all
InMail ports. The system briefly displays
this name when a display multiline terminal
user calls a Voice Mail port (either by
pressing Message, their voice mail key, or
by dialing the master number). You should
always end the name with the ## charac-
ters. The system substitutes the port num-
ber for the last #. Using the default name
InMail ##, for example, the telephone dis-
play shows InMail #1 when calling port 1.
InMail ##
(The system
substitutes the
port number for
the # when call-
ing the port.)
03 Incoming Message
Length
1 ~ 4095 seconds (Subs Msg Length)
Use this option to set the maximum length
of recorded messages for:
• Subscriber Mailbox users dialing RS to
record and send a message.
• Extension users leaving a message in a
Subscriber Mailbox.
• Outside Automated Attendant callers ac-
cessing a mailbox via a GOTO com-
mand and then dialing RS to record and
send a message.
• Subscriber Mailbox Greetings.
• Announcement Messages.
• Call Routing Mailbox Instruction Menus.
The length of a Conversation Record
is 10 times the Subscriber Message
Length. Since the Conversation Re-
cord time cannot exceed 4095 sec-
onds, any setting in Subscriber Mes-
sage Length larger than 4095 has no
effect on the length of recorded con-
versations.
120 seconds
04 Non-Subscriber Mes-
sage Length
1 ~ 4095 seconds (Mbox Msg Length)
Use this option to set the maximum length
of recorded messages for:
• Automated Attendant callers leaving a
message or Quick Message in a Sub-
scriber Mailbox.
• Outside callers transferred by an exten-
sion user to a Subscriber Mailbox.
120 seconds
SL1100 ISSUE 6.0
2-408 Program 47 : InMail
Program
47
To Next Page
Loading...
