NEC SL1100 - Incoming Virtual Extension Ring Tone Order Setup

Program 15 : Extension, Basic Setup
15-10 : Incoming Virtual Extension Ring Tone Order Setup
Level:
SA
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set the priority (1 ~ 4)
for the Virtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an
extension simultaneously, the tone with the highest order number (e.g., 1) rings. The other keys only
flash. There are 50 Virtual Extension ports.
Input Data
Extension Number Maximum eight digits
Item No. Item Input Data Description Related Program
01 Priority Or-
der
1 ~ 4 When two or more virtual
extensions are set on a
function key on the tele-
phone, and the tone pat-
tern by which the sound
of each extension differs,
the priority of ring sound
is set up.
15-08
Data 0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension Ring Tone
5 = Tone Pattern 5 (V3.0 Added)
6 = Tone Pattern 6 (V3.0 Added)
7 = Tone Pattern 7 (V3.0 Added)
8 = Tone Pattern 8 (V3.0 Added)
Default
• By default, Virtual Extension ring tones have the following order :
Priority Order Ring Tone (Set in Program 15-08)
1 0 (Tone Pattern 1)
2 1 (Tone Pattern 2)
3 2 (Tone Pattern 3)
4 3 (Tone Pattern 4)
Conditions
None
Feature Cross Reference
None
ISSUE 6.0
SL1100
Programming Manual 2-151
Program
15