NEC SL1100 - Trunk Group Routing for Networking

Program 21 : Outgoing Call Setup
21-16 : Trunk Group Routing for Networking
Level:
IN
(This Program is available for V1.5 or higher)
Description
Use Program 21-16 : Trunk Group Routing for Networking to assign Program 14-06 routes for a
networked system. This is required to seize the trunk in a networked system (Extension in System A
tries to make an external call using a trunk in System B).
The route number is specified for each system ID (01 ~ 04).
Input Data
System ID 01 ~ 04
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Description Default Related
Program
01 Route Table
Number
0 ~ 25
0 = No Setting (Calls
will not route.)
If a call comes in from across the
network, this program determines
the route table (PRG 14-06-01) that
will be accessed in the local system.
1 14-06-01
Conditions
None
Feature Cross Reference
• SL-Net
SL1100
ISSUE 6.0
2-246 Program 21 : Outgoing Call Setup
Program
21