NEC SL1100 - Fractional Setup

Program 10 : System Configuration Setup
10-39 : Fractional Setup
Level:
IN
Description
Use Program 10-39 : Fractional Setup to enable or disable the ability to use fractional T1 or PRI.
Input Data
Item
No.
Item Input Data Description Default
01 Fractional 0 = Disable (when disa-
bled the system will as-
sign the PRI as a full PRI
trunks.)
1 = Enable (when ena-
bled the system will not
assign any trunks to the
PRI, the trunks must be
manually configured.)
This program is used to enable/disable the
system's ability to use a fractional PRI or
T1.
0
Conditions
None
Feature Cross Reference
None
SL1100 ISSUE 6.0
2-38 Program 10 : System Configuration Setup
Program
10