Program 90 : Maintenance Program
90-05 : Slot Control
Level:
IN
Description
Note: This program is available via telephone programming and WebPro not through PC
Programming.
Use Program 90-05 : Slot Control to reset or delete (uninstall) units (slots 0 ~ 15 (V3.5 or higher)).
Delete allows you to completely uninstall the unit. You should do this if you want to remove a unit and
plug it into a different slot and still retain the port assignments. If a different type of interface unit is
being installed in a slot previously used, the slot should be deleted (option 1) first before installing the
new interface unit.
Reset allows you to send a reset code.
Input Data
Menu Number
1 = Delete
2 = Reset
3 = Set Busy Out
4 = Reset Busy Out
Item
No.
Item Input Data Default
01 Slot Control Slot Number 0 ~ 15 (V3.5 Changed) -
Conditions
• When you delete or reset a unit, you must first remove it from its slot then run Program 90-05. When
reusing the slot for another unit, you must plug the unit in or reset the system before the system can
use the slot again.
• When you delete or reset a unit, all related programming in Program 10-03-01 is set back to default.
Feature Cross Reference
None
ISSUE 6.0
SL1100
Programming Manual 2-537
Program
90
To Next Page
Loading...
