NEC SL1100 - Service Code Setup (for System Administrator)

Program 11 : System Numbering
11-10 : Service Code Setup (for System Administrator)
Level:
IN
Description
Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service
Codes for the System Administrator. You can customize additional Service Codes in Programs 11-11 ~
11-16. The following chart shows:
• The number of each code (01 ~ 50).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry. For example, dialing item 26 allows users to force a trunk line to disconnect.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Night Mode
Switching
0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT 718 12-xx
20-07-01
03 Setting the Sys-
tem Time
0~9,
*
, # Maximum of
8 digit
Terminal: MLT 728
04 Storing Common
Speed Dialing
Numbers
0~9,
*
, # Maximum of
8 digit
Terminal: MLT 753
05 Storing Group
Speed Dialing
Numbers
0~9,
*
, # Maximum of
8 digit
Terminal: MLT 754
06 Setting the Auto-
matic Transfer
for Each Trunk
Line
0~9,
*
, # Maximum of
8 digit
Terminal: MLT 733 24-04-01
07 Canceling the
Automatic Trans-
fer for Each
Trunk Line
0~9,
*
, # Maximum of
8 digit
Terminal: MLT 734 24-04-01
08 Setting the Desti-
nation for Auto-
matic Trunk
Transfer
0~9,
*
, # Maximum of
8 digit
Terminal: MLT 735 24-04-01
09 Charging Cost
Display by the
Supervisor
0~9,
*
, # Maximum of
8 digit
Terminal: MLT No Setting
11 Entry Credit for
Toll Restriction
0~9,
*
, # Maximum of
8 digit
Terminal: MLT No Setting
12 Night Mode
Switching for
Other Group
0~9,
*
, # Maximum of
8 digit
Terminal: MLT 618 12-xx
20-07-01
SL1100 ISSUE 6.0
2-70 Program 11 : System Numbering
Program
11