NEC SL1100 - Network Address

Program 10 : System Configuration Setup
10-58 : Network Address
Level:
IN
(This Program is available for V1.5 or higher)
Description
Use Program 10-58 : Network Address to set the local network address when the SIP Terminal
(V4.0 or higher) terminal connects the system via a local router.
Input Data
Area Table 1 ~ 8
Item
No.
Item Input Data Description Default Related
Program
01 Network Address 0.0.0.0 ~
126.255.255.254 |
128.0.0.1
~191.255.255.254 |
192.0.0.1 ~
223.255.255.254
Sets local network address.
If the system uses both the Intranet
and NAT router please input the IP
Network address of the terminal
connected to the Internet. (V4.0
Added)
0.0.0.0 10-46-14
02 Subnet Mask 248.0.0.0 | 252.0.0.0 |
254.0.0.0 | 255.0.0.0
255.128.0.0 |
255.192.0.0 |
255.224.0.0
255.240.0.0 |
255.248.0.0 |
255.252.0.0
255.254.0.0 |
255.255.0.0 |
255.255.128.0
255.255.192.0 |
255.255.224.0
255.255.240.0 |
255.255.248.0
255.255.252.0 |
255.255.254.0
255.255.255.0 |
255.255.255.128
255.255.255.192 |
255.255.255.224
255.255.255.240 |
255.255.255.248
255.255.255.252 |
255.255.255.254
Sets local subnet mask. 0.0.0.0 10-46-14
Conditions
None
ISSUE 6.0
SL1100
Programming Manual 2-51
Program
10