NEC SL1100 - IP Trunk Availability

Program 10 : System Configuration Setup
10-40 : IP Trunk Availability
Level:
IN
Description
Use Program 10-40 : IP Trunk Availability to enable or disable the ability to use SIP trunks and
assign the number of ports if IP Trunk is enabled.
Input Data
Slot Number 0
Item
No.
Item Input Data Default
01 IP Trunk Availability 0 = Disable
1 = Enable
0
02 Number of Ports 0 ~ 32 (Port)
(0 = None)
SIP trunks are assigned in increments of two.
Please note that if odd port number is set it will
use 1 extra port. (V2.0 Changed)
0
Conditions
None
Feature Cross Reference
None
ISSUE 6.0 SL1100
Programming Manual 2-39
Program
10