NEC SL1100 - Voip Basic Setup (DSP)

Program 84 : Hardware Setup for VoIPDB
84-26 : VoIP Basic Setup (DSP)
Level:
IN
Description
Use Program 84-26 : VoIP Basic Setup to set the IP address and the port of VoIP.
Input Data
Slot Number 0
VoIPDB GW Number
GW Number will not be shown in Telephone Programming mode.
1
Item
No.
Item Input Data Default
01 IP Address xxx.xxx.xxx.xxx 172.16.0.20 ~
02 RTP Port Number 0 ~ 65534 VoIP GW １ =
10020~10051
03 RTCP Port Number RTP Port Number + 1 VoIPDB GW1 = 10021
Conditions
None
Feature Cross Reference
None
ISSUE 6.0 SL1100
Programming Manual 2-519
Program
84