NEC SL1100 - Trunk Incoming Ring Tone of Extension Setup

Program 15 : Extension, Basic Setup
15-28 : Trunk Incoming Ring Tone of Extension Setup
Level:
IN
(This Program is available for V1.5 or higher)
Description
Use Program 15-28 : Trunk Incoming Ring Tone of Extension Setup to define the ringing tone for
each trunk port of extension.
Input Data
Extension Number Up to eight digits
Trunk port number 001 ~ 084
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Description Default Related
Program
01 Trunk Incoming
Ring Tone
0 = Trunk incoming ring
tone
1 = High
2 = Middle
3 = Low
4 = Melody 1
5 = Melody 2
6 = Melody 3
7 = Melody 4
8 = Melody 5
Assign individual ring tones at ex-
tension for each trunk and each
Night mode.
When 0 (Trunk incoming ring tone)
is selected, it follows the setting of
Program 15-02-02.
0 22-03
15-02-02
Conditions
None
Feature Cross Reference
None
SL1100
ISSUE 6.0
2-162 Program 15 : Extension, Basic Setup
Program
15