NEC SL1100 - SIP System Interconnection Setup

Program 10 : System Configuration Setup
10-23 : SIP System Interconnection Setup
Level:
SA
Description
Use Program 10-23 : SIP System Interconnection Setup to determine if the system is
interconnected and define the IP address of another system, call control port number and alias
address for SL1100 system interconnection.
Input Data
System Number 001 ~ 1000
Item
No.
Item Input Data Default
01 System Interconnection 0 = No (Disable)
1 = Yes (Enable)
0
02 IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
03 Call Control Port Read Only:
1 ~ 65535
1720
04 Dial Number Up to 12 digits (0 ~ 9) No Setting
Conditions
None
Feature Cross Reference
None
ISSUE 6.0 SL1100
Programming Manual 2-25
Program
10