Program 22 : Incoming Call Setup
22-07 : DIL Assignment
Level:
IN
Description
Use Program 22-07 : DIL Assignment to assign the destination extension or Department Calling
Group for each DIL Incoming trunk. A DIL rings an extension directly, without any other Access Map or
Ring Group programming. If an extension has a line key, the DIL rings the line key. Use Program
22-02 to designate a trunk as a DIL. You can make eight DIL assignments, one for each Night Service
mode.
Input Data
Trunk Port Number 001 ~ 084
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Description Default
01 Number of Transfer-
ring Destination
Maximum of 8 digits (0 ~
9,
, #)
Assign extension or department group
number for DIL trunk.
No Setting
Conditions
• Program 22-02 must be set to four for the trunk.
Feature Cross Reference
• Direct Inward Line (DIL)
ISSUE 6.0 SL1100
Programming Manual 2-263
Program
22
To Next Page
Loading...
