NEC SL1100 - Trunks Operator Setting

Program 20 : System Option Setup
20-36 : Trunk's Operator Setting
Level:
IN
Description
Use Program 20-36 : Trunk’s Operator Setting to assign a trunk to an operator group.
Input Data
Trunk Port Number 001 ~ 084
Item
No.
Item Input Data Description Default
01 Trunk’s Operator Set-
ting
0 ~ 15
(0 = No Setting)
Allows the user to select Operator Group
per trunk when DISA is being used. After
the user enters the 6 digit DISA password
if the user dials 0 this command will decide
which operator to route the call to.
0
Conditions
None
Feature Cross Reference
None
ISSUE 6.0 SL1100
Programming Manual 2-215
Program
20