NEC SL1100 - Delete Command

Program 92 : Copy Program
92-07 : Delete Command
Level:
IN
Description
Use Program 92-07 : Delete Command to delete the data of each extension number of each
extension group or each table.
Input Data
Program Number XX-XX
Item No. Item Input Data
01 Destination Number (From) Each extension port = 001 ~ 128 (V3.5 Changed) (Program
11-02)
Each virtual extension port = 01 ~ 50 (Program 11-04)
Each extension group = 1~32 (Program 11-07)
Each ACD Group = 1 ~ 2 (V1.5 Added)
Destination Number (To)
The following table lists Programs that use the Delete Command function.
Program Number Program Name
11-02 Extension Numbering
11-04 Virtual Extension Numbering
11-07 Extension (Department) Group Pilot Number
11-17 ACD Group Pilot Number (V1.5 Added)
Conditions
None
Feature Cross Reference
None
ISSUE 6.0
SL1100
Programming Manual 2-621
Program
92