Program 10 : System Configuration Setup
10-65 : NTP Server Setting
Level:
IN
(This Program is available for V4.0 or higher)
Description
Use Program 10-65 : NTP Server Setting to set the NTP Server.
Input Data
Item
No.
Item Input Data Description Default
01 NTP Server 0 = Disable (Stop)
1 = Enable (Start)
Set 1 when you want to start the NTP
Server.
0 (Stop)
02 NTP Server Port 1 ~ 65535 Set the receiving port of NTP Server. 123
Conditions
None
Feature Cross Reference
None
ISSUE 6.0 SL1100
Programming Manual 2-57
Program
10
To Next Page
Loading...
