NEC SL1100 - DSS Console Key Assignment; Table 2-7 Function Number List

Program 30 : DSS/DLS Console Setup
30-03 : DSS Console Key Assignment
Level:
SA
Description
Use Program 30-03 : DSS Console Key Assignment to customize the key assignments for 60-
button DSS Consoles. A DSS Console key can have any function with up to eight digits (e.g.,
extension number or Service Code).
To prevent lamp problems when reassigning DSS Console keys, clearing an extension programmed
key before reassigning it is recommended [Enter key to be cleared + 00 or
*
00 (If using WebPro or
PC Programming, delete the key assignments and upload the change to the system before
proceeding.)] Without clearing an extension key first, the DSS Console may not show the correct lamp
display, although the DSS function works correctly.
If you are programming the system from the extension to which the DSS Console is connected, either
by phone or using the WebPro or PC Program, you may need to unplug the DSS and plug it back in to
reset the console lamping.
Input Data
Index 1
DSS Console Number
01 ~ 12
Index 2
Item No. Key Number Function Number Additional Data
01 001 ~ 114 0 ~ 99, #0 ~ #99 (General
Functional Level)
*
00 ~
*
99 (Appearance
Functional Level)
Refer to Table 2-7 Function
Number List on page 2-314.
Table 2-7 Function Number List
[1] General functional level (00 ~ 99, #00 ~ #99)
Function
Number
Function Additional Data LED Indication Note
01 DSS/One-Touch Extension Number or
any Numbers (up to
36 digits)
On (Red) : DSS Ext. Busy
Off : DSS Ext. Idle, DND External, DND
Transfer, CFW Busy, CFW Noans, CFW
Busy/Noans, CFW Both, CFW FL ME
Fast Blink (Red) : DND Intercom, DND
All, CFW Imm
02 Microphone Key (ON/
OFF)
On (Red) : Mic On
Off : Mic Off
03 DND Key On (Red) : DND Setup
04 BGM (ON/OFF) On (Red) : Active
05 Headset On (Red) : Headset Operation
06 Transfer Key None
SL1100 ISSUE 6.0
2-314 Program 30 : DSS/DLS Console Setup
Program
30