NEC SL1100 - Short Ring Setup; Table 2-14 Frequency 1;2 Table

Program 80 : Basic Hardware Setup for System
80-09 : Short Ring Setup
Level:
IN
Description
Use Program 80-09 : Short Ring Setup to define the short ring tone for SL1100 multiline terminals.
Input Data
Short Ring Number 01 ~ 32
Item
No.
Item Input Data Description Default
01 Frequency 1 00 = No setting, 01 ~ 15 Refer to Table 2-14 Frequency 1/2 Table
on page 2-462.
Refer below
02 Frequency 2 00 = No setting, 01 ~ 15 Refer to Table 2-14 Frequency 1/2 Table
on page 2-462.
Refer below
03 Ring Cycle 00 = No setting, 01 ~ 14 Refer to Table 2-15 Ring Cycle Table on
page 2-463.
Refer below
When a single tone is sent, Frequency 1/2 is set to the same value.
Table 2-14 Frequency 1/2 Table
Data Frequency (Hz)
01 392
02 440
03 494
04 523
05 587
06 659
07 698
08 784
09 880
10 988
11 1046
12 1175
13 1318
14 1397
15 1568
SL1100 ISSUE 6.0
2-462 Program 80 : Basic Hardware Setup for System
Program
80