NEC SL1100 Programming Manual

Program 31 : Paging Setup
31-01 : System Options for Internal/External Paging
Level:
IN
Description
Use Program 31-01 : System Options for Internal/External Paging to define the system options for
Internal/External Paging.
The system shows the name you program on the telephone display. Use the following chart when
entering and editing text. When using the keypad digits, press the key once for the first character,
twice for the second character, etc. For example, to enter C, press 2 three times. Press 2 six times to
display the lower case letter.
Key for Entering Names
When entering names in the procedures below, refer to this chart. Names can have up to 12 digits.
Use this keypad digit ... When you want to ...
1 Enter characters : 1 @ [ ¥ ] ^ _ ` { | } Á À Â Ã Å Æ Ç É Ê ì ó 0
2 Enter characters : A-C, a-c, 2.
3 Enter characters : D-F, d-f, 3.
4 Enter characters : G-I, g-i, 4.
5 Enter characters : J-L, j-l, 5.
6 Enter characters : M-O, m-o, 6.
7 Enter characters : P-S, p-s, 7.
8 Enter characters : T-V, t-v, 8.
9 Enter characters : W-Z, w-z, 9.
0 Enter characters : 0 ! “ # $ % & ’ ( ) ô õ ú å ä æ ö ü α ε θ В
*
Enter characters :
*
+ , - . / : ; < = > ? π Σ σ Ω ∞ ¢ £
# # = Accepts an entry (only required if two letters on the same key are needed - ex : TOM).
Pressing # again = Space. (In system programming mode, use the right arrow soft key instead
to accept and/or add a space.)
Clear/Back Clear the character entry one character at a time.
Flash Clear all the entries from the point of the flashing cursor and to the right.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 All Call Paging
Zone Name
Up to 12 Characters Assign a name to each All Call Inter-
nal Paging zone. The name shows
on the display of the telephone mak-
ing the announcement.
Group all 11-12-19
31-02-02
02 Page Announce-
ment Duration
0 ~ 64800 seconds This timer sets the maximum length
of Page announcements. (Affects
External Paging only)
1200 seconds
SL1100 ISSUE 6.0
2-322 Program 31 : Paging Setup
Program
31

NEC SL1100 Specifications

General

System Type	Hybrid
VoIP Capability	Yes
Integrated Voicemail	Yes
Auto Attendant	Yes
Conference Calling	Yes
Caller ID	Yes
Music on Hold	Yes
Power Supply	100-240 VAC, 50/60 Hz
Humidity	10% to 90% (non-condensing)
Type	Business Phone System
Maximum VoIP Channels	16
Operating Temperature	0°C to 40°C