Program 84 : Hardware Setup for VoIPDB
84-27 : VoIP Basic Setup
Level:
IN
Description
Use Program 84-27 : VoIP Basic Setup to set the DTMF Relay and the SRTP mode of the VoIPDB.
Input Data
Slot Number 0
Item
No.
Item Input Data Description Default
01 DTMF Relay Setup 0 = DTMF Relay disa-
bled
1 = In-Band DTMF Relay
- Do not report to host
processor
2 = Out Band Relay - Do
not pass tones as voice
2
02 Setup CODEC Mode 0 = Default
1 = Mode 1 (G.723/
iLBC)
Default means the system uses another
CODEC except G.723.
Mode 1 means the system uses all CO-
DECs, but the limitation of the total num-
ber of available DSP will be applied.
0
03 SRTP Mode Setup 0 = Disable
1 = Enable
0
04 SRTP Mode Select 0 = Mode1 0
06 H.245 Port Number 0 ~ 65535 10100
07 Preparation Comple-
tion Response Port
Number
0 ~ 65535 4000
08 DTMF Duration 0 = Use RFC2833
25 ~ 2000 ms
0
09 DTMF Pause 0 = Use RFC2833
25 ~ 2000 ms
0
10 DTMF Twist Positive
Level
0 ~ 24 dB 5
11 DTMF Twist Negative
Level
0 ~ 24 dB 0
12 DTMF Duration 30 ~ 2000 ms 100
13 DTMF Level 1 ~ 61 (- 36 dB ~ + 24
dB
1 = - 36 dB
2 = - 35 dB
:
37 = 0 dB
:
60 = 23 dB
61 = 24 dB
25 (- 12 dB)
SL1100 ISSUE 6.0
2-520 Program 84 : Hardware Setup for VoIPDB
Program
84
To Next Page
Loading...
