Program 84 : Hardware Setup for VoIPDB
84-10 : ToS Setup
Level:
IN
Description
Use Program 84-10 : ToS Setup to set up the Type of Service data.
Input Data
Protocol Type 1 ~ 3 = Not used
4 = Networking (V1.5 Changed)
5 = RTP/RTCP
6 = SIP
7 = Not used
8 = SIP-MLT
9 = SIP Trunk
10 = Not used
Item
No.
Item Input Data Description Default
01 ToS Mode 0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
When Input Data is set to 1, Item No. 07 is
invalid. When Data is set to 2, Item No. 02
~ 06 are invalid.
0
02 Priority, IP Prece-
dence
0 ~ 7
0 = Low
7 = High
1 = Router queuing priority 0
03 Low Delay 0 ~ 1
0 = Normal Delay, Low
Delay
1 = Optimize for low delay routing 0
04 Wideband (Through-
out)
0 ~ 1
0 = Normal Throughput
1 = High Throughput
1 = Optimize for high bandwidth routing 0
05 High Reliability 0 ~ 1
0 = Normal Reliability
1 = Low Reliability
1 = Optimize for reliability routing 0
07 Priority (D.S.C.P. - Dif-
ferentiated Services
Code Point)
0 ~ 63 DSCP (Differentiated Services Code Point) 0
Conditions
• The system must be reset for these program options to take affect.
Feature Cross Reference
None
ISSUE 6.0
SL1100
Programming Manual 2-497
Program
84
To Next Page
Loading...
