EasyManua.ls Logo

NEC SL1100 - Chapter 3 Toolbar Functions; SECTION 1 TOOLBAR FUNCTIONS

NEC SL1100
650 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program 10 : System Configuration Setup
10-33 : SIP Registrar/Proxy Information Basic Setup
Level:
IN
Description
Use Program 10-33 : SIP Registrar/Proxy Information Basic Setup to set the registrar/proxy
options for SIP extensions.
Input Data
Item
No.
Item Input Data Description Default
01 Registration Expire
Time
60 ~ 65535 After this time expires, the UA’s are forced
to reregister with the CPU. This allows the
CPU to keep a current location of the en-
tire end UA’s.
3600
02 Authentication Mode 0 = Disable
1 = Enable
Check here if a password is desired for the
IP SIP phones to register. When checked,
15-05-16 must have a password entered
and also the SIP phone must have the
same password. When using Authentica-
tion, the station number is the authoriza-
tion name.
0
03 Registrar/Proxy Do-
main Name
Up to 64 Characters Set the domain name of the SIP proxy. No Setting
04 Registrar/Proxy Host
Name
Up to 48 Characters Set the domain name of the SIP proxy. No Setting
05 NAT Mode (V4.0 Add-
ed)
0 = Disable
1 = Enable
Enable this Mode if the System controls
the SIP Phone by the NAT router.
0
Conditions
None
Feature Cross Reference
None
ISSUE 6.0
SL1100
Programming Manual 2-35
Program
10

Table of Contents

Other manuals for NEC SL1100

Related product manuals