Program 20 : System Option Setup
20-34 : Remote Conference Group Setup
Level:
SA
Description
Use Program 20-34 : Remote Conference Group Setup to define the Remote Conference options.
Input Data
Remote Conference Group Number 1 ~ 4
Item
No.
Item Input Data Description Default
01 Conference Name Up to 12 characters Enter the name displayed at the time of a
Remote Conference. This entry will display
on the keyset LCD.
Group1 = Conf1
Group2 = Conf2
Group3 = Conf3
Group4 = Conf4
02 Password 4 digits Fixed
(0 ~ 9, @ = wild charac-
ter)
Define the password of a Remote Confer-
ence.
Group1 = 1111
Group2 = 2222
Group3 = 3333
Group4 = 4444
03 Max participants 0 ~ 16 Define the maximum number of partici-
pants of a Remote Conference.
8
04 Max Conference Du-
ration
0 ~ 64800 seconds Define the maximum duration of a Remote
Conference.
When this time passes, the conference is
disconnected by the SL1100.
7200
05 End Tone Alert Time 0 ~ 64800 seconds Determine how long prior disconnecting a
Remote Conference call (based on the
maximum conference duration above) the
SL1100 should send out a beep. This is
used to warn the conference participants
of the pending disconnect.
300
08 Automatic Recording
(V6.0 Added)
0 = Disable
1 = Enable
Enable or Disable automatic recording for
a Remote Conference. If disabled, a line
key must be used to start recording.
0
09 Recording Destina-
tion Mail Box (V6.0
Added)
1 ~ 128 Enter the mailbox number where record-
ings are to be stored.
This is the mailbox number not the ex-
tension number for a mailbox.
No Setting
Conditions
None
Feature Cross Reference
• Conference, Remote
ISSUE 6.0
SL1100
Programming Manual 2-213
Program
20
To Next Page
Loading...
