Program 92 : Copy Program
92-03 : Copy Program by Port Number
Level:
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 92-03 : Copy Program by Port Number to copy extension and the data of each
outside line.
Input Data
Program Number XX-XX
Item No. Item Input Data Description
01 Source Number • For Trunk Base : Trunk Port Number
001 ~ 084
• For Trunk Group Base : Trunk Group
Number 01 ~ 25
• For Extension Number : 001 ~ 128
(V3.5 Changed)
Including Virtual Extension : 01 ~ 178
(V3.5 Changed)
• For Department Group Base : De-
partment Group Number 01 ~ 32
• For DSS : (DSS Console Number 01
~ 12
Enter the port number from where
the data is to be copied.
02 Destination Number (From) Enter the first port number to
where the information is to be
copied
03 Destination Number (To) Enter the last port number to
where the information is to be
copied. If the information is to be
copied only to one port, enter the
information entered in the Desti-
nation Number (From) entry.
Refer to Program 92-01 Copy Program on page 2-612 for program that can be copied.
Conditions
None
Feature Cross Reference
None
SL1100
ISSUE 6.0
2-616 Program 92 : Copy Program
Program
92
To Next Page
Loading...
