EasyManua.ls Logo

NEC SL1100 - Virtual Extension Key Enhanced Options

NEC SL1100
650 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program 15 : Extension, Basic Setup
15-18 : Virtual Extension Key Enhanced Options
Level:
IN
Description
Use Program 15-18 : Virtual Extension Key Enhanced Options to define the operation when a
Virtual Extension Key is pressed.
Input Data
Extension Number including Virtual Extensions Up to eight digits
Item
No.
Item Input Data Description Default Related
Program
01 Virtual Extension
Key Operation
Mode
0 = Release
1 = Land on the key
Define if calls to a Virtual Extension
Key land on the Virtual or on the ex-
tension/CO appearance.
This is assigned for the Virtual
Extension Key, not the extension
it resides on.
1 20-04-01
02 Display mode
when placing a
call on Virtual
Extension Key
0 = Secondary Exten-
sion Name
1 = Actual Station
Name
Defines if calls to or from a Virtual
Extension Key display the Virtual
Extension Key name or the name of
the extension it resides on.
1
03 Show CLI (V3.0
Added)
0 = No CLI info
1 = Show CLI info
When set to a 0, the caller ID of a
trunk call/station call pointed to a vir-
tual extension will not be displayed if
the virtual extension is not set to
ring. When set to a 1, the caller ID
of a trunk call pointed to a virtual ex-
tension will be displayed if the virtual
extension is not set to ring. Station
calls to a virtual that is not assigned
to ring will display the station name
or number if PRG 15-18-04 is set to
a 1.
0 15-09-01
04 Show Internal
Caller Informa-
tion (V3.0 Added)
0 = Do Not Show
1 = Show
When set to a 0, internal calls to the
virtual extension will not show the
name or number of the extension
that is calling.
When set to 1, internal calls to the
virtual extension will show the name
or number of the extension that is
calling if the virtual is assigned to
ring or if PRG 15-18-03 is set to a 1.
0 15-09-01
15-18-03
05 One Ring (V3.0
Added)
0 = Normal Ring Cycle
1 = One Ring
When set to a 0, the virtual exten-
sion follows the normal ring cycle.
When set to a 1, the virtual exten-
sion will only ring one time (the virtu-
al extension must be first set to ring
in PRG 15-08).
0 15-09-01
SL1100 ISSUE 6.0
2-158 Program 15 : Extension, Basic Setup
Program
15

Table of Contents

Other manuals for NEC SL1100

Related product manuals