NEC SL1100 - ISDN PRI Layer 2 (T-Point) Initial Data Setup

Program 81 : Basic Hardware Setup for Trunk
81-05 : ISDN PRI Layer 2 (T-Point) Initial Data Setup
Level:
MF
Description
Use Program 81-05 : ISDN PRI Layer 2 (T-Point) Initial Data Setup to define the various basic data
for layer 2 of ISDN PRI.
Input Data
Item
No.
Item Input Data Description Default
01 Timer T200 1 ~ 255 (100 ~ 25500
ms)
Specify the timer value in 1/100ths of a
second at the end of which transmission of
a frame may be initiated.
10 (1 sec)
02 Timer T201 1 ~ 255 (100 ~ 25500
ms)
Specify the minimum time in 1/100ths of a
second between retransmissions of the
TEI Identity check messages.
10 (1 sec)
03 Timer T202 1 ~ 255 (100 ~ 25500
ms)
Specify the minimum time in 1/100ths of a
second between retransmissions of the
TEI Identity check messages.
20 (2 sec)
04 Timer T203 1 ~ 255 (100 ~ 25500
ms)
Specify the maximum time in 1/100ths of a
second allowed without exchanging
frames.
250 (25 sec)
05 N200 1 ~ 255 Specify the retransmission count. 3
06 N201 1 ~ 65535 (Byte) Specify the frame lengths in ocelots. 260
07 N202 1 ~ 255 Specify the maximum number of transmis-
sions from a TEI identity request message
when the user requests a TEI.
3
Conditions
None
Feature Cross Reference
None
ISSUE 6.0
SL1100
Programming Manual 2-469
Program
81